Becken BTE3509 Manual De Instrucciones página 7

• The heater must not be located immediately below an electrical
socket outlet.
• Do not run the cord under carpeting and do not cover the cord with
throw rugs, runners or the like. Place the cord away from any foot
traffic area and where it will not be tripped over.
• Do not operate the heater with a damaged cord or plug, or after the
heater malfunctions, has been dropped, or damaged in any manner.
• If the supply cord is damaged, contact the Customer Support Service
in order to avoid a hazard.
• Use the heater in a well-ventilated area. Do not insert or allow
objects to enter any ventilation or exhaust opening. To prevent the
risk of fire, do not block the air or exhaust openings in any manner.
• Do not use on soft surfaces, where openings may become blocked.
Use the heater on flat, dry surfaces only.
• Do not place the heater near flammable materials, surfaces or
substances, as there may be a risk of fire. Keep the above flammable
materials, surfaces or substances at least 1 m from the front of the
product and keep them away from the sides and rear.
• Do not use the heater in any areas where petrol, paint or other
flammable liquids are stored e.g. garages or workshops as hot, arcing
or sparking parts may enter the heater.
• Do not use this heater in the immediate surroundings of a bath,
shower or swimming pool (600 mm clearance) with the floor
standing mode. Never locate the heater where it may fall into a
bathtub or any other water container.
AF Manual Instruções Emissor Térmico 600W Mod.BTE3509 A5 EN.indd 7
Ceramic Radiator | Emisor Térmico | Emissor Térmico
EN
7
29/05/2018 18:41