Maintenance - Becken BTE3509 Manual De Instrucciones

Note: when pressing
its factory presettings.
Other notes
1. The screen has a back light. It will turn off after 1 minute if no buttons
are pressed. It will light up again when pressing any button.
2. The unit has a button lock function. The buttons will be locked
( ) after 1 minute if no buttons are pressed. To open the lock:
press
3. The time will be reset to 00:00 if you unplug the unit, or if there is a
power failure.
4. This heater includes an overheat protection system that shuts off
the heater when there are parts becoming excessively hot.
5. will only be displayed when the unit is overheating.
6. The units will always go into free use mode from the standby mode.
7. The unit will return to the last operating mode when powered off and
on.

2.3. Maintenance

1. Always remove the plug from the socket/outlet and allow the heater
to cool down before cleaning it.
2. Wipe the exterior surface of the heater occasionally with a soft
damp cloth (not dripping wet) and dry the exterior surface before
operating the heater.
22
AF Manual Instruções Emissor Térmico 600W Mod.BTE3509 A5 EN.indd 22
to switch the power on, the unit will return to
and at same time.
29/05/2018 18:41