Cleaning The Humidification Filter; Replacing The Humidification Filter - Philips HU4810 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
6 Cleaning the
humidification
filter
Clean the humidification filter every
week to keep it hygienic.
1
Switch off the humidifier and unplug
it (fig j).
2
Hold by both sides of the upper unit
and lift it up (fig b).
3
Take out the humidification filter
and the filter support from the water
tank (fig k).
4
Remove the humidification filter
from the filter support (fig l).
5
Soak the humidification filter in tap
water for one hour (fig m).
6
Rinse the humidification filter under
a slowly running tap (fig n).
7
Let excess water drip off the
humidification filter.
8
Assemble the humidification filter
round the filter support (fig d).
9
Put the humidification filter and the
filter support back into the water
tank (fig e).
10
Place the upper unit back onto the
water tank (fig g).
Note
Do not squeeze or wring the filter. This
might damage the filter and impact
humidification performance.
Do not dry the filter under direct
sunlight, unless it is assembled back
onto the filter support
EN
8
7 Replacing the
humidification
filter
Replace the humidification filter every
three months for optimal performance.
If the filter is in good condition, you
could use it for a longer period of time.
Make sure to replace the humidification
filter at least once a year.
Note
Use only Philips original humidification
filter HU4102.
Tip
Register your product at www.philips.com
for further information on how to replace
your filter.
1
Switch off the humidifier and unplug
it (fig j).
2
Hold by both sides of the upper unit
and lift it up (fig b).
3
Take out the humidification filter
and the filter support from the water
tank (fig k).
4
Remove the humidification filter
from the filter support. Discard the
used filter (fig o).
5
Remove the packaging material of
the new humidification filter (fig c).
6
Assemble the new humidification filter
around the filter support (fig d).
7
Put the filter and the filter support
back into the water tank (fig e).
8
Place the upper unit back onto the
water tank (fig g).
Tip
You can easily find more information
about how to replace the filter in our
web page or by calling our Consumer
Care Center.
Tabla de contenido

Solución de problemas

loading

Tabla de contenido