Cleaning The Humidification Filter; Replacing The Humidification Filter - Philips 2000 Serie Manual De Usuario

6 Cleaning the
humidification
filter
Clean the humidification filter every
week to keep it hygienic.
1
Switch off the humidifier and unplug
it (fig j).
2
Hold by both sides of the upper unit
and lift it up (fig b).
3
Take out the humidification filter
and the filter support from the
water tank (fig k).
4
Remove the humidification filter
from the filter support (fig l).
5
Soak the humidification filter in
cleansing agent (e.g diluted citric
acid solution) for one hour (fig m).
Note
•
Please use mid or acid cleanser
(24g citric acid with 4L water).
6
Rinse the humidification filter under
a slowly running tap (fig n).
7
Let excess water drip off the
humidification filter.
8
Assemble the humidification filter
round the filter support (fig d).
9
Put the humidification filter and the
filter support back into the water
tank (fig e).
10
Place the upper unit back onto the
water tank (fig g).
Note
•
Do not squeeze or wring the filter. This
might damage the filter and impact
humidification performance.
•
Do not dry the filter under direct
sunlight, unless it is assembled back
onto the filter support
8 EN
7 Replacing the
humidification
filter
Replace the humidification filter every 6
months for optimal performance. If the
filter is in good condition, you could use
it for a longer period of time. Make sure
to replace the humidification filter at
least once a year.
Note
•
Use only Philips original humidification
filter FY2401.
Tip
•
Register your product at www.philips.com
for further information on how to replace
your filter.
1
Switch off the humidifier and unplug
it (fig j).
2
Hold by both sides of the upper unit
and lift it up (fig b).
3
Take out the humidification filter
and the filter support from the
water tank (fig k).
4
Remove the humidification filter
from the filter support. Discard the
used filter (fig o).
5
Remove the packaging material of
the new humidification filter (fig c).
6
Assemble the new humidification
filter around the filter support (fig d).
7
Put the filter and the filter support
back into the water tank (fig e).
8
Place the upper unit back onto the
water tank (fig g).
Tip
•
You can easily find more information
about how to replace the filter in our
web page or by calling our Consumer
Care Center.