Dryer Plenum Air Hose Assembly - Bradley Advocate AV Serie Manual De Installation

Installation

Dryer Plenum Air Hose Assembly

5
The dryer hood is factory-installed. For
clarity, the basin, soap assembly and
faucet assembly are not shown.
Attach air hose from left upper
B
dryer plenum thru dryer hood
base opening and down to
lower dryer plenum.
Orient worm gears
A
to sides so that dryer
hood can be closed.
Bradley • 215-1773 Rev. G; ECN 15-08-006
Dryer Hood
Cover Tab
Dryer Hood
Base Pocket
Dryer Hood
Base Opening
C
Dryer Hood
AV30 is shown. AV90 is similar.
Attach air hose from right upper dryer
plenum thru dryer hood base opening
and down to dryer motor assembly inlet.
To Reinstall the Dryer Hood Cover
A
B
4/20/2015
Remove Dryer
Hood Cover
Upper Dryer Plenum
Air Hose (Attached
by Bradley)
Remove (2) #10 x 1½"
A
screws (use Hex
¹⁄₈"
Driver) and lift cover up
and back to remove.
Position the dryer hood
cover tabs into the dryer
hood base pockets.
Rotate cover down and secure
the cover to the base with the
two #10 x " screws. Use ¹⁄₈"
³⁄₈
hex driver to remove screws.
AV90
13