Bracket Mounting; Drain Assembly - Bradley Verge LVQD1 Manual De Instalación

LVQD1
1

Bracket Mounting

Typical installation is shown. It may be necessary to repair the wall
after mounting. The fixture may not cover all of the wall modifications.
Mounting height per structural rough-in dimensions.
2

Drain Assembly

For ease of drain installation, lay the bowl on its back.
10
5"
(127mm)
min.
C L
A
2/4/2019
A
Assemble the remaining components as
shown and thread the four screws through
the drain adapter and into the basin inserts.
Ensure the screws compress the drain adapter
evenly onto the basin. Do not overtighten.
Bradley • 215-1842 Rev. E; ECO 18-08-023
Installation
Install wall bracket to wall
per structural rough-in
dimensions. Check to
ensure the bracket is
level. Example anchor
locations shown.
Access Panel brackets can
be installed at this time, if
preferred. See Step 14.
O-Ring
Drain
Adapter
Packing
Washer
#10-24
Screw