Kenmore 125.10341 Manual De Uso Y Cuidado página 8

WARNING
Before charging, make sure unit is OFF.
1. Plug the charging
adapter into an
outlet. Insert the
vacuum cleaner onto
the charger base as
shown.
2. Make sure the vacuum cleaner is fully
charged before using for the first time. The
vacuum may take up to 5 hours to charge
completely if fully discharged.
3. The battery charge
indicator will flash
continuously until vacuum
is fully charged.
Battery Charge Indicator:
25% 50%
CHARGING
75% 100%
- 8 -
4. When the vacuum has
reached full charge (100%),
the battery charge indicator
will remain lit with four
(4) bars illuminated for 3
seconds then go to dormant
mode with no illuminated
lights showing.
NOTE: If the battery charge indicator does
not illuminate when charging, ensure the
following:
• That the vacuum cleaner is seated
properly onto the charger base.
• That the charging adaptor is plugged into
the outlet properly.
• That the adaptor power plug is connected
properly on the charger base.
NOTE: For improved battery performance,
always keep the vacuum cleaner on the
charger base while not in use.