Mode Menu - OHAUS Scout SJX Serie Manual De Instrucciones

EN-12
Back Light [b.Light]
Sets backlight functionality.
OFF = always off
ON = always on
AUTO = turns on when a button is pressed or the displayed weight changes.
Note: When connected with power pack, the backlight is always on.
Auto Tare [A.tArE]
Set the automatic tare functionality.
OFF = Automatic Tare is disabled
ON = the first stable gross weight is tared
ON-ACC = stable gross loads within the accept limits are tared (in Check weighing mode)
Auto off [A.OFF]
Set the automatic shut off functionality.
OFF = disabled
1 = powers off after 1 minute of no activity
5 = powers off after 5 minutes of no activity
10 = powers off after 10 minutes of no activity
End Setup [End]
Advance to the next menu or return to the top of the current menu.

4.4 Mode Menu

This menu activates modes so they will be available for use with the Mode button.
Reset: no, yes
Weigh: off, on
Count: off, on
Percent: off, on
Check: off, on
Totalization: off, on
Density: off, on
Hold: Disp, Peak, Off
End Mode: Exit menu
Reset [reset]
Reset the Mode menu to factory defaults.
NO = not reset
YES = reset
Weigh [wWeIGH]
Set the status.
OFF = disabled
ON = enabled
Count [Count]
Set the status.
OFF = disabled
ON = enabled
Percent [Percnt]
Set the status.
OFF = disabled
ON = enabled
TM
SCOUT SJX SERIES BALANCES