Get Started - Silk’n Fresh H4001 Instrucciones De Uso

6. Get started!

1. Select the brush head suitable for your skin
type. Gently push the brush head onto
the nipple which sits on top of the brush
attachment point, until you hear a click.
a
Make sure that the nipple covers the metal
attachment point before you start your
treatment. This will prevent it from touching or
irritating your skin.
2. Pour the face wash into the dispenser (see section "4.3 What
types of face wash can I use?", and section "4.4 Adding liquid face
wash").
3. Dampen your face with lukewarm water.
4. Moisten the brush head with lukewarm water. Do not use a
dry brush head on the face or neck, because it may cause skin
irritation.
5. Press the control button to turn on the device. The device
automatically starts in the low speed vibration mode.
6. To select the mode you want, keep pressing the control button
to cycle through the modes (see section "4.2 Indicator lights and
function settings").
7. To release face wash, hold the device in an upright position
and press the dispensing button once, then release. It may take
a second or so before the dispenser releases the face wash. The
device will release face wash for about 3 seconds . If you need
more, press the dispensing button again.
a For first time use, press the dispensing button a few times until
face wash is released.
8. Gently press the brush head against your skin and move it in an
upward circular motion. There's no need to apply any pressure.
a Try to avoid delicate skin areas such as around the eyes or lips.
9. To finish, rinse your skin with water, and pat dry with a towel.
11
EN