KOBE PREMIUM IN-026 Serie Instrucciones De Instalación Y Manual De Operación página 10

13. Install the front section of the liner with 3 screws (not included)
Hood Preparation Before Installation
CAUTION
: If moving the cooking range is necessary to
install the hood, turn off the power in an electric range at
the main electrical box. SHUT OFF THE GAS BEFORE
MOVING A GAS RANGE.
14. Choose the required vent option. The Round Exhaust Plate is
pre-installed for top vent.
15. For Top 3-1/4" x 10" rectangular installation only:
Remove the pre-installed Round Exhaust Plate (Refer to
-
Figure 5). Keep screws to attach Rectangular Exhaust
Plate and Rectangular Exhaust Adapter.
Place Rectangular Exhaust Plate over vent and secure
-
with 2 screws (Refer to Figure 6). Place Rectangular
Exhaust Adapter over the Rectangular Exhaust plate and
secure with 10 screws (Refer to Figure 6).
Use remaining screws to secure exhaust plate.
-
For Rear Vent Options only:
NOTE: The blower is pre-installed for top vent. If
installing as rear vent, follow the steps below.
16. For Rear 6" round installation only:
Remove the Rear Round Vent Cover and Rear
-
Rectangular Vent Cover (Refer to Figure 4).
screws to attach Round Exhaust Plate to rear vent.
Remove the pre-installed Round Exhaust Plate from top
-
vent (Refer to Figure 5). Attach it to the rear vent (Refer
to Figure 7) using the screws removed from vent covers.
Use the Round and Rectangular vent covers removed
-
from rear vent to seal top vent.
Remove the 4 screws that secure the blower system
-
(Refer to Figure 8). Hold the blower to keep it from
dropping as you remove screws. Keep screws to re-
attach blower. Slowly rotate blower system to align with
mounting holes at the back of the insert. Secure blower
using 4 screws (Refer to Figure 9).
17. For Rear 3-1/4" x 10" rectangular installation only:
Remove the Rear Round Vent Cover and Rear
-
Rectangular Vent Cover (Refer to Figure 4).
screws to attach Rectangular Exhaust Plate and
Rectangular Exhaust Adapter.
Place the Rectangular Exhaust Plate over vent and
-
secure with 2 screws (Refer to Figure 10). Place
Rectangular Exhaust Adapter over the Rectangular
Exhaust Plate and secure with 10 screws (Refer to Figure
10).
Use remaining screws to secure exhaust plate.
-
Remove the pre-installed Round Exhaust Plate from top
-
vent and keep screws (Refer to Figure 4). Use the Round
and Rectangular vent covers removed from rear to seal
top vent. Remove the 4 screws that secure the blower system
-
(Refer to Figure 8). Hold the blower to keep it from
dropping as you remove screws. Keep screws to re-
attach blower. Slowly rotate blower system to align with
mounting holes at the back of the insert. Secure the
blower using 4 screws (Refer to Figure 9).
Figure 5
Figure 6
Keep
Figure 7
Keep
Figure 8
8