Beurer medical FT 65 Manual De Instrucciones página 24

If the measured value is within the normal range (< 100.4°F/38°C), the green LED lights up for 3 seconds. If the measured
value is higher (≥ 100.4°F/38°C, high temperature), the red LED is illuminated.
Measuring body temperature on the forehead
If the measured value is within the normal range (< 100.4°F/38°C), the green LED lights up for 3 seconds. If the measured
value is higher (≥ 100.4°F/38°C, high temperature), the red LED is illuminated.
24
Make sure that the sensor tip and also the ear canal are clean.
As the ear canal is slightly curved, you have to pull the ear slightly up and backwards
before inserting the sensor tip. This is important so that the sensor tip can be pointed
directly at the eardrum.
• Insert the sensor tip carefully and press the
• Release the button. The end of the measuring time is signalled with a short beep
and the measured value appears on the display.
Please note that the forehead/temples must be free from sweat and cosmetics and that
taking vasoconstrictive medication and skin irritations can distort the result when measuring
temperature on the forehead.
• Press the button for 1 second to switch the thermometer on. Following a successful
self test, the device emits two short beeps.
• Place the measuring head with the forehead/cover cap fitted on the temples, hold down
the Forehead button and move the thermometer smoothly over the forehead to the
Stirn
other temple.
• Then release the Forehead button. The end of the measuring time is signalled with a
Stirn
short beep and the measured value appears on the display.
button for 1 second.