technical support service. In order to prevent any risk of danger, do not open the device. Only qualified technical
personnel from the brand´s Official technical support service may carry out repairs or procedures on the device.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the non-
observance of these warnings.
INSTALLATION
Put the heater on a flat, dry and clean surface. Install the rollers as shown on the below drawing.
INSTRUCTIONS FOR USE
- Plug the appliance to AC 220-240V 50-60Hz socket. If you are not sure, we advise you to contact a
professional electrician for more details.
- To start the heater, choose power like below:
- Set the temperature with the thermostat
- To stop the heater, turn the switch to the position "0".
- Unplug the product when it' s not in use
Information requirements for electric local space heaters
MODEL IDENTIFIER(S): CU2000T
Item
Symbol
Heat output
Nominal heat output
P nom
Minimum heat output
P min
(indicative)
Maximum continuous
P max,c
heat output
Auxiliary electricity
consumption
14
Value
Unit
Item
Type of heat input, for electric storage local space heaters only
2.0
KW
Manual heat charge control, with integrated thermostat
0,9
KW
Manual heat charge control with room and/or outdoor
temperature feedback
2.0
KW
Electronic heat charge control with room and/or outdoor
temperature feedback
Fan assisted heat output
Unit
No
No
No
No
