ANSMANN 10.8 Manual Del Usuario página 6

USE
CAPACITY DISPLAY
Press the power button to check the energy remaining.
ƒ ƒ
4 LEDs illuminate:
ƒ ƒ
3 LEDs illuminate:
ƒ ƒ
2 LEDs illuminate:
ƒ ƒ
1 LED illuminates:
NO LED ILLUMINATES:
The POWERBANK is completely discharged. Please charge the POWER-
BANK immediately. If the POWERBANK will be unused for an extended
period of time, it is necessary to charge it before storage in order to
avoid the rechargeable battery being damaged due to deep discharge.
> CHARGING THE POWERBANK:
Insert the Micro-USB plug of the USB cable into the Micro-USB socket
on the POWERBANK and the USB plug into the USB port on a computer
or a USB charger.
The charge process starts automatically. During the charge process,
up to 4 flashing LEDs indicate the status of the charge progress. After
the charge process is complete, all 4 LEDs illuminate steadily.
> CHARGING DEVICES:
In order to charge a device, such as a smartphone for example, please
use the USB cable supplied (provided that the Micro-USB plug fits your
mobile device) or the original charge cable for your device. Insert the
USB plug of the cable into the POWERBANK and the other end into your
device. The charge process starts automatically.
Simultaneous charging of multiple end-devices is possible with res-
trictions. This depends on the total charge current required.
The POWERBANK switches off automatically after the charging is com-
plete. Please disconnect your device from the POWERBANK once the
charge process is complete. Please note that the Powerbank cannot
be charged and discharged simultaneously.
The POWERBANK may heat up a little depending on the charge/
discharge current.
Deutsch |
75% - 100%
50% - 75%
25% - 50%
1% - 25%
English | Français | Español | Português
Italiano | Nederlands