Pure Cycle Tm - Samsung WA456 Serie Manual Del Usuario

maintaining your washer
PuRE CyCLE
Pure Cycle is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1. Press the Power button.
2. Select the Pure Cycle
• Once the Pure Cycle
function that can be set is Delay Start.
3. Press the Start/Pause button.
• If you press the Start/Pause button, Pure Cycle begins.
• Using Pure Cycle, you can clean the drum without using a cleansing agent.
• Never use Pure Cycle when laundry is in the washing machine. This may cause damage to
CAuTIon
the laundry or a problem with the washing machine.
The Pure Cycle Auto Indicator function
• If the "Pure Cycle" is lit after a wash, it indicates that tub
(drum) cleaning is required. In this case, remove the laundry
from the washing machine, turn the power on, and clean
the drum by running Pure Cycle.
• If you do not run Pure Cycle, the "Pure Cycle
turns off. However, the "Pure Cycle
again after two washes. Not running Pure Cycle at this
point will not cause a problem with the washing machine.
• Although the Pure Cycle Auto Indicator appears once a
month or so, the frequency may differ depending on the
number of times the washing machine is used.
30_ maintaining your washer
WA456DRHDWR-03133A-07_EN.indd 30
TM
course.
Tm
course is selected, the only
TM
" indicator
TM
" indicator will light
Tm
WA456*
WA422* / WA400*
WA456*
WA422* / WA400*
2013-12-23 19:05:20