JVC KD-SX24BT Manual De Instrucciones página 36

INSTALLATION/CONNECTION
Wiring connection
JVC Amplifier *
1
Signal cord (not supplied)
Fuse (10 A)
Remote wire
(not supplied)
Ignition switch
Car fuse block
Separate red wire
Make this connection if your vehicle
factory wiring harness does not
have "12 V ignition switch" wire.
32
ENGLISH
Rear/subwoofer output
For 3-way crossover: Woofer output
Microphone input jack ( 11)
Light blue/yellow
Join the same color wires together.
Blue/white: Remote (12 V 350 mA)
Orange/white: Illumination
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
Gray: Front speaker/For 3-way crossover: Mid range speaker (right)
Gray/black
White: Front speaker/For 3-way crossover: Mid range speaker (left)
White/black
Purple: Rear speaker/For 3-way crossover: Tweeter (right)
Purple/black
2
Green: Rear speaker *
/For 3-way crossover: Tweeter (left)
Green/black * 2
IMPORTANT
We recommend installing the unit with a commercially available
custom wiring harness specific for your car and leave this job to
professionals for your safety. Consult your car audio dealer.
Antenna terminal
To the steering wheel remote control adapter
Blue: To power antenna
Blue/white: To amplifier
(Not used)
Vehicle dashboard
Factory wiring harness
(vehicle)
Custom wiring harness
(separately purchased)
Brown
* 1
Firmly connect the ground
wire of the amplifier to
the car's chassis to avoid
damaging the unit.
* 2
You can also connect a
subwoofer speaker directly
using this lead without
an external subwoofer
amplifier. For setting, 20.
Recommended connection