Operating The Washer - LG WT5001C Serie Manual De Propietario

H O W TO U S E

OPERATING THE WASHER

wWARNING:
appliance, follow basic precautions, including the following.
Once you have loaded the washer and added laundry products (detergent, bleach, and/or fabric softener):
NOTE: When the wash cycle is finished, the beeper (if set) will sound and the lid will unlock.
To prevent wrinkling, remove items from the washer immediately after the end of the cycle.
NOTE: WAVEFORCE™ is available for 8 lb. or larger loads in the COTTON/NORMAL or HEAVY DUTY
14
cycles.
To reduce the risk of fire, electric shock, or personal injury when using this
SORT LAUNDRY AND LOAD WASHER.
1
Refer to page 16.
ADD DETERGENT.
2
Refer to pages 17-18.
TURN ON THE WASHER.
3
Press the POWER button to turn on the washer.
The lights around the cycle selector knob will
illuminate.
SELECT CYCLE.
4
Turn the cycle selector knob to the desired cycle.
The display will show the preset WASH/RINSE
temperature, SOIL LEVEL, SPIN SPEED for that
cycle.
SELECT CYCLE MODIFIER BUTTONS.
5
If you would like to change the modifier for
that cycle, press the appropriate cycle settings
button(s) until the indicator light for the desired
setting is lit.
NOTE: To protect your garments, not every
WASH/RINSE temperature, SPIN SPEED, SOIL
LEVEL, or OPTION is available with every cycle.
SELECT OPTION BUTTONS.
6
Select any additional cycle options, such as
FABRIC SOFTENER or DELAY WASH.
NOTE: To protect your garments, not every
WASH/RINSE temperature, SPIN SPEED, SOIL
LEVEL, or OPTION is available with every cycle.
BEGIN CYCLE.
7
Press the START/PAUSE button to begin the
cycle. The lid will latch, the display will change,
and the washer will calculate the estimated time
remaining. Once the washer has calculated the
estimated total cycle time, the washer will start.
To pause the cycle at any time, press PAUSE.
To resume the cycle press START/PAUSE again.