Statement Of Use; Electrical Connection; Maintenance Instructions - Desoutter Industrial Tools SLBN003 Serie Manual Del Usaurio

6159922090_07
Original instructions
© Copyright 2019, Ets Georges Renault 44818
St Herblain, FR
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.

STATEMENT OF USE

Product is designed for installing and removing
threaded fasteners in wood, metal and plastic.
No other use permitted.
For professional use only.
DATA
(See page 5).
Noise level: < 70 dB(A) (EN 60 745).
Vibration level: < 2.5 m/s² (EN 60 745).
SLBN tools are ESD (ElectroStatic
Discharge) certified screwdrivers,
according to requirements of
IEC 61340-5-1 standard.
Declaration of noise and vibration emission
All values are current as of the date of this
publication. For the latest information please visit
desouttertools.com.
These declared values were obtained by
laboratory type testing in accordance with the
stated standards and are suitable for comparison
with the declared values of other tools tested
in accordance with the same standards. These
declared values are not adequate for use in risk
assessments and values measured in individual
work places may be higher. The actual exposure
values and risk of harm experienced by an
individual user are unique and depend upon
the way the user works, the workpiece and the
workstation design, as well upon the exposure
time and the physical condition of the user.
We, Desoutter, cannot be held liable for the
consequences of using the declared values,
instead of values reflecting the actual exposure,
in an individual risk assessment in a work place
situation over which we have no control.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration
can be found at http://www.pneurop.eu/uploads/
documents/pdf/PN3-02-NV_Declaration_info_
sheet_0111.pdf
We recommend a programme of health
surveillance to detect early symptoms which
may relate to noise or vibration exposure, so that
management procedures can be modified to help
prevent future impairment.
10 / 56
REQUIREMENTS
These tools need to be use with controllers
ESP1 / ESP2-A.
Dedicated clamping area for torque
reaction.
(See page 7).

ELECTRICAL CONNECTION

(See page 8).
ACCESSORIES
A wide range of accessories are available and
suitable items should be selected from the
relevant Desoutter Catalogue.
OPERATING INSTRUCTIONS
A B
≤ 0.8s >3.2s
To remove a previously tightened fixing,
reposition the switch in position unscrewing
(Fig.B) and increase the torque setting (Fig. C).
Again press the tool into the fixing and it will
unscrew.

MAINTENANCE INSTRUCTIONS

Regular inspection of the mains cable (1)
must be carried out and if damaged it must be
replaced.
WARNING
Part number
6153979080
6153978500
6153979070
PC-TPR
6153978490
6153976540
When disposing of components,
lubricants, etc ... ensure that the
relevant safety procedures are carried
out.
English
C
Nm
=
04/2019