Dimmer Curves - Cameo AURO SPOT 400 Manual De Usuario

DEVICE SETTINGS (Settings)
Pressing the MODE button will take you to the selection menu for system settings (System Settings). Using the arrow buttons, select the menu item
"Settings" (dark background) and confirm by pressing ENTER. You will then be taken to the sub-menu to set the following sub-menu items:
System Settings
DMX Address 001
Mode DMX 27CH
Settings
System Info
Settings
Display Rev = Flip Display
Display = Display lighting
DMX Fail = Operation status with DMX
signal interruption
DimmerCurve = Dimmer Curve
Pan Rev = Pan Reverse
Tilt Rev = Tilt Reverse
Pan Angle = Pan Angle
Feedback = position correction
Fan Set = Fan Speed
Mov Blackout = Automatic blackout during
head movement
Test = Function test
Reset = Reset

DIMMER CURVES

linear
DMX value
Confirm the setting changes with ENTER and press the MODE button (possibly several times) to return to the main display. After approximately 1
minute of inactivity, the display will automatically return to the main screen.
DEVICE INFORMATION (System Info)
Pressing the MODE button will take you to the selection menu for system settings. Using the arrow buttons, select the menu item "System Info" (dark
background) and confirm by pressing ENTER. You will then be taken to the sub-menu to display the device information. Use the arrow buttons again
to select the desired parameters and then press ENTER.
20
ON
OFF
ON
OFF
Hold
Auto
Blackout
Linear
Exp
Log
S-Curve
ON
OFF
ON
OFF
630
540
ON
OFF
Regular
Silent
ON
OFF
ON
OFF
Pan&Tilt
Head
All
exponential logarithmic
DMX value DMX value
= Rotation of the display by 180° (overhead installation)
= no rotation of the display
= permanently on
= deactivation after approx. 1 minutes of inactivity
= last command is held
= activates the AUTO mode
= activates Blackout
= The light intensity increases linearly with the DMX value.
= Adjustment of the light intensity is finer in the lower DMX value range and
coarser in the upper DMX value range.
= Adjustment of the light intensity is coarser in the lower DMX value range
and finer in the upper DMX value range.
= Adjustment of the light intensity is finer in the lower and upper DMX value
ranges and coarser in the middle DMX value range.
= Reversal of the Pan direction
= no reversal of the Pan direction
= Reversal of the Tilt direction
= no reversal of the Tilt direction
= Pan angle 630°
= Pan angle 540°
= activates automatic position correction
= deactivates automatic position correction
= maximum brightness at normal fan function
= if necessary, reduced brightness with silent fan
= Blackout during head movement
= no blackout during head movement
= step-by-step function test of LED and all motors (Pan, Tilt, Gobo...)
= stops the function test
= Resetting of the Pan & Tilt motors
= Resetting all Head motors (colour wheel, gobo wheel, prism...)
= Resetting all motors and settings
S-curve
DMX value