Vacuum interface:
• Unbag the airproof loop of sponge from the interface and put it into warm and soapy
water for safe washing.
Please note
► The airproof loop of sponge should be dried thoroughly prior to reassembling.
► When re-assembling, be careful to prevent any damage and assembles as original
position to ensure no vacuum leaking.
Zip-bag adapter
• You can open the adapter for easier cleaning.
15 Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
15.1 Safety notices
Attention
► Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
► Improperly performed repairs can cause considerable dangers for the user and
damages to the device.
15.2 Cause and Action
In the event of a fault, an error code will appear in the display; it describes the cause of
the fault.
Error
Vacuum unit is not
functioning
caso Vakuumierer VC120
• Please open the adapter and clean it with
warm water.
Opened adapter
• Wipe off the adapter with a soft cloth and put it
together again afterwards.
Possible cause
Power plug is not plugged in
Defective power cable or
plug
Rectification
Plug in mains plug!
Send device to Customer
Service
45