Tabla de contenido
Idiomas disponibles
Idiomas disponibles
For Parts Call 606-678-9623 or 606-561-4983
For Parts Call 606-678-9623 or 606-561-4983
6.
Lock the ends of the line in opposite slots on the
spool (Fig. 23). Place the clear plastic line retainer
back over the line and spool (Fig. 24). Pull the lower
line up into the lower slot in the clear plastic line
retainer (Fig. 25). Pull the upper line down into the
upper slot (Fig. 26).
Fig. 23
Fig. 24
Fig. 25
Fig. 26
MAINTENANCE INSTRUCTIONS
www.mymowerparts.com
www.mymowerparts.com
7.
Insert the line through each eyelet in the spool carrier
and slide the spool into the carrier. (Fig. 27)
NOTE: Ensure that the line is within the clear plastic
line retainer. If it's outside of the clear plastic line
retainer, the line will not feed.
8.
Make sure to insert the spring, assemble the spool
and spool carrier back onto the trimmer. To do so,
push the head on and turn it clockwise until it locks.
(Fig. 28 and Fig. 29)
12
Fig. 27
Fig. 28
Fig. 29
Tabla de contenido
