Naish 2010 KITE Guía Del Usario página 9

3. ASSEMBLING THE BAR AND LINES
Assembling the Universal Control System
Preparation:
Pic 1- Position your Sigma kite on the beach with the second strut,
(on one side) facing directly into the wind. Place sand on the canopy
between the second and third strut. Layout the bar upwind of the kite.
Place the red side of the bar on the left side when you are looking down
wind toward the kite. Make sure the lines are straight and not wrapped,
knotted or tangled in any way.
1
Attaching your lines to the bridle:
Pic 2- Move the steering lines outside of the kite and attach the red and
blue steering lines to the back line bridle attachments using the larks
head. Attach the grey front lines to the front line bridle attachments us-
ing the larks head on the front lines. Make sure to keep the left and right
front line on the correct side, without twists. Make sure that all bridle
lines are clear and free of tangles. Make sure there are no knots in any
of the flying or bridle lines. Make sure the pulleys on the bar and in the
bridle system are turning freely.
2
Fool Proof Flying Lines:
Naish kites are equipped with specialized flying line connectors which
prevent inadvertently attaching the front lines to the trailing edge and
the opposite. The pictures below show how to use this feature. The line
connectors have a handy easy-open feature as well. Pull on the black
tab to release your flying lines after your session.
9
naishkites.com