JBM 50812 Manual De Instrucciones página 11

REF. 50812
FEATURES
Capacity (T)
12
Upper beam
Bottle jack
Jack base plate
Press table
Frame
posts
Base
supports
ASSEMBLY INSTRUCTIONS
Read the IMPORTANT SAFETY INFORMATION section at the beginning of this document,
including all text under the subheadings, before installing or using this product.
Inspect tool before use, looking forward for damaged, loose, and missing parts. If any problems
are found, do not use tool until repaired.
Components of this Shop Press are heavy. You will need a helper to safety assemble this product.
1. Put on safety goggles and heavy leather boots.
2. Putt he frame posts (20) on the stable, flat and level surfa-
ce. Align the holes on the upper beam (1) with the holes in the
top of the frame posts (20) and secure in place with the bolts
(2), washers (3) and nuts (4). [FIGURE 1]
Stroke (mm)
150
Lever
Working range (mm)
0-730
· 11 ·
Width (mm)
470
WARNING
1. Do not overextend the
Ram (do not overreach
the warning line).
2. Do not overreach the
loading capacity.
3. Do not attempt to
operate pump unless
the breather valve both
on pump and gauge
are open. Do not press
unless the Hand Winch is
released.
[FIGURE 1]