Connection Using The Direct En- Troy Of The Network Key - Peaq PDR200 Manual De Instrucciones

ENGLISH
WLAN-REGION AND WLAN-NETWORK
• Select the WLAN-Region in which you
are located. The device then looks for
available wireless networks. If a wireless
network is not found, the device shows
the notifications <No WLAN network
found>. Please check in this case wheth-
er your router and WLAN are switched
on.
Note
Make sure that the DHCP-server of your
router (Access Point) is activated. Otherwise,
the WLAN connection must be configured
manually. The WLAN should send out the
SSID. If the SSID is not sent out, you must
configure the WLAN manually.
• Select the network from which you want
to operate Internet radio.
PUBLIC NETWORK CONNECTION
Select the appropriate WLAN-network by
clicking on the entry of the network's name.
The connection procedure takes place
automatically.
Note
In the Systems settings > Setup wizard , you
can manually configure the network.
42
PDR200_A5_131219_1.indb 42
PRIVATE NETWORK CONNECTION
Select WPS connection type
If a network is protected by a WEP or WPA
encryption, the query for constructing a con-
nection over WPS (Wi-Fi Protected Setup)
appears. If the router of your wireless net-
work has a WPS function, select whether the
WPS connection should be established by
entering a PIN code over the WPS key on
the router.
WPS connection using PIN entry
A WPS-PIN appears in the Internet radio dis-
play. Enter this PIN and confirm the Internet
radio with OK. The WPS connection will then
be established.
Connection using WPS key
Press the WPS key on the router and then
confirm the display on Internet radio with
SELECT. The WPS connection is then
established.
CONNECTION USING THE DIRECT EN-
TROY OF THE NETWORK KEY
If you do not want to establish any connec-
tion using the WPS, select the entry, No
WPS and then enter the network key in the
following dialogue. Confirm the entry with
SELECT.
19/12/13 10:39 AM