Worldcast Systems AUDEMAT FM PROBE Guía Rápida página 5

4. Connecting to the network
Before connecting to the network, check the unit's IP address:
When the unit has not been set yet, the main screen
is blank, press the Return button to display the
menu.
Use the down arrow until you see the System menu
and select it. Press the Check button.
Use the down arrow to select the Network menu
and press the Check button
Use the down arrow to select the Configuration
menu and press the Check button.
If you need to change the IP address:
• Use the Check button to switch to edit mode
• Use the Left and Right buttons to select the
various groups of digits
• Use the Up and Down buttons or the swipe
around the wheel modify the values
• When the IP address has been modified, use
the Check button to save the new value.
Proceed the same way to change the mask and gateway if necessary.
You may now connect the AUDEMAT FM PROBE to the network using the provided Ethernet cable.
5. Configuring the AUDEMAT FM PROBE using the embedded website
Connecting to the web site
For remote access, connect to the unit's embedded web site. Simply open a web browser (Google
Chrome recommended) and enter the unit's IP address in the address bar (set on the front panel).

Though the web application is compatible with most browsers, performances vary from one browser
to another. For optimal performances, Google Chrome is recommended.

The browser may display a message indicating that the connection is not certified; however, the site
is secured (data is encrypted) and you may proceed to access it. To prevent these potential blocking
and warning messages, WorldCast Systems now supplies certificates for HTTPS browsing, see the
user manual for more information.
Select the language if necessary.
Enter the default user name and password: Admin / admin
English version
5