Using The Partition; Baking - Samsung NE59 685 Serie Manual De Usuario

Operating the oven

Using the partition

• To use Twin Mode operation, insert the partition.
• You cannot use the Self-Clean or Steam-Clean functions when the partition is
installed in the oven cavity.
• Handle the partition with both hands.
•
Use oven gloves when inserting or removing the partition.
To Install the Partition into the Oven Cavity
34 English
NE59M6850SS_AA_DG68-00883A-04_EN+MES+CFR.indb 34
1. Insert the partition into the 5th rack
position of the cavity.
2. Push the partition in until its back end
rests against the back of the cavity.
3. If the partition is installed correctly, the
"-" icon appears on the display.
CAUTION
Range displays "-dC-"
• Check the partition to see if it is
installed correctly.

Baking

The oven can be programmed to bake at any temperature from 175 °F to 550 °F.
Baking temperature and time will vary depending on the ingredients and the size
and shape of the baking pan used. Dark or nonstick coatings may cook faster with
more browning.
How to set the temperature
1. To use Twin mode, insert the partition. If you are using Single mode, skip this
step.
2. Press Bake. the default temperature is 350 °F.
3. Enter the temperature you want on the number pad eg. 3, 7, 5.
4. Press START/SET. The temperature display will start to change once the oven
temperature reaches 175 °F.
If you want to cancel baking or if baking is complete, press OFF/CLEAR.
5.
(Press OFF/CLEAR on the Lower/Single oven control side if you are using Twin
mode.)
NOTE
Place food in the oven after preheating if the recipe calls for it. Preheating is very
important for good results when baking cakes, cookies, pastry, and breads. After
the oven has reached the desired temperature, the range will beep 6 times.
NOTE
For performance reasons, the convection fan may be turned on or off during the
operation.
How to adjust the temperature while cooking
1. Start the setup.
Press Bake. The display will show the present temperature, eg. 375 °F.
2. Enter the temperature you want, eg. 425 °F, using the number pad.
3. Complete the entry by pressing START/SET.
The process is the same in Twin Mode.
2019-02-01 12:47:56