For Your Safety - Flex FHE 2-22 SDS-plus Instrucciones De Funcionamiento Originales

FHE 2-22

For your safety

WARNING!
Read all safety instructions and other
instructions. Failure to observe the safety
instructions and other instructions may
result in an electric shock, fire and/or serious
injuries. Save all warnings and instructions
for future reference.
Before using the power tool, please read
and follow:
these operating instructions,
–
the "General safety instructions" on the
–
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915), the
currently valid site rules and the
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged.
The power tool may be operated only if it is
as intended,
–
in perfect working order.
–
Faults which impair safety must be repaired
immediately.
Intended use
The hammer drill FHE 2-22 SDS-plus
is designed
– for commercial use in industry and trade,
– for hammer drilling in masonry and
concrete for wall plug and anchor
attachments and through-holes,
– for drilling in wood and metal,
– to be used with suitable tools
recommended by the manufacturer
for this power tool.
Safety instructions for hammers
 Wear ear protection. The effect of noise
may result in loss of hearing.
 Use auxiliary handles supplied with
the power tool. The loss of control may
result in injuries.
 Hold power tool by insulated gripping
surfaces only, when performing an
operation where the cutting accessory
may contact hidden wiring or its own
cord. Cutting accessory contacting a "live"
wire may make exposed metal parts of the
power tool "live" and shock the operator.
Additional safety instructions
 Use suitable detectors to detect concea-
led power supply cables or consult your
local supply company.
Contact with electric cables may result
in a fire and/or electric shock.
A damaged gas pipe may cause an explo-
sion. Cutting into a water pipe will cause
damage to property or may cause an elec-
tric shock.
 When working, hold the electric power
tool firmly with both hands and ensure
that you have a secure footing.
The electric power tool is controlled
more securely if held with both hands.
 Secure the workpiece.
A workpiece is held more securely
in a clamping device than by hand.
 Do not use the electric power tool if it has
a damaged power cord.
Do not touch the damaged power cord
and pull out the mains plug if the power
cord is damaged during work.
Damaged power cords increase the risk
of an electric shock.
 Only use tools with SDS-plus tool holder.
Pull on the insertion tool to check that
it is locked properly.
 Immediately have a damaged dust
cap replaced. The dust cap prevents
the ingress of dust into the tool holder.
13