Hama 00200000 Instrucciones De Uso página 4

Note the instructions in your device's operating manual.
If these do not contain any instructions expressly to the
contrary, proceed as follows:
Warning
• Do not use force to connect the notebook connector.
• Missing or lost notebook connectors can be requested
via our support hotline or by visiting www.hama.
com/adapter-service. Available connectors will be
sent to you free of charge.
• Use the connector on the original power supply unit to
select the appropriate notebook connector.
• Without connecting it to the power supply unit,
determine the mechanical compatibility between the
notebook connector and the connection socket on the
terminal device.
• The connector must slide easily into the socket but
should not exhibit too much play.
Warning
• Only operate the product from a socket that has been
approved for the device. The socket must be installed
close to the product and must be easily accessible.
• Disconnect the product from the power supply using
the On/Off switch – if this is not available, unplug the
power cord from the socket.
• If using a multi-socket power strip, make sure that the
total power consumption of all connected devices does
not exceed the power strip's maximum throughput
rating.
• Connect the appropriate notebook connector to the
power supply unit's DC connection cable.
• Connect the power cord to the power supply unit and
your terminal device.
• Then connect the mains plug to a properly installed
socket.
• When the power supply is active, the LED lights up to
indicate that the power supply unit is ready for operation.
• The terminal device can now be used and switched on /
charged.
Note
Disconnect the product from the mains after use.
Note regarding the USB-A socket
You have the option of charging or operating USB
devices from the power supply unit's USB socket, e.g.
tablet PC, smartphone, etc. The maximum output current
from the USB socket is 1 A.
5. Care and Maintenance
Note
Disconnect the product from the mains before cleaning.
• Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
• Ensure that no water is able to enter the product.
6. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
7. Technical data
Ambient temperature
Specifications in accordance with
Regulation (EU) 2019/1782
Manufacturer's name or
trade mark, commercial
registration number and
address
Model identi er
Input voltage
Input AC frequency
Output voltage /
Output current /
Output power
Average active e ciency
E ciency at low load
(10 %)
No-load power
consumption
0° – 40° C
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
00054188 / 00200000
100 – 240 V
50 / 60 Hz
19.0 V DC / 3.42 A / 65.0 W
19.0 V DC / 3.14 A / 59.7 W
5.0 V DC / 1.0 A / 5.0 W
86.0 %
80.6 %
0.18 W
3