Idiomas disponibles
Idiomas disponibles
7. Use upper 2 holes in the RH mounting bracket
as a template to drill 2 holes through inner side
of pickup bed (FIG. 14-1). Then, bolt RH mount-
ing bracket to inner side wall of pickup bed as
shown in FIG. 14-1. Repeat for LH mounting
bracket.
8. Unlatch and unfold platform. Refer to
operation manual if needed. Then, adjust
liftgate position so platform is level from
front to back.
9. Securely tighten bolts fastening RH mounting
bracket to main frame bracket (FIG. 11-1).
Ensure the split lock washers are not in the
slotted holes on main frame bracket. Repeat
for LH mounting bracket.
10. Reinstall taillights (FIG. 14-1).
LIFT CORPORATION Sht. 14 of 54 DSG#
INSTALLING LIFTGATE - Continued
LOCK WASHER
(2 PLACES)
RH MOUNTING
BRACKET
3/8"-16 HEX BOLT
(2 PLACES)
BOLTING RH MOUNTING BRACKET
TO PICKUP BED (LIFTGATE NOT SHOWN)
M-15-10
Rev. D Date: 09/21/18
3/8" HEX NUT
(2 PLACES)
3/8"
DRILL 2 HOLES
TAILLIGHT
FIG. 14-1
ALUMINUM
SPACERS
INNER
SIDE WALL
