Nexgrill EVOLUTION INFRARED PLUS 720-0864M Guia Del Propietario página 23

Adjust High/Low Flame Setting Screw
When converting from LP to Natural gas, you will need to
adjust the high flame setting screw for ideal burner flame
height.
1. Remove each control knob for the main burners and
side burner.
2. Use a flat-blade screwdriver to turn the high flame
setscrew clockwise approximate 90º.
3. Check that burner operates at the new high flame
setting. It may be necessary to adjust the screw setting
slightly more to get the ideal burner flame height.
Natural Gas Conversion Assembly Instructions
4. Replace the control knob and turn off the burner.
5. Repeat steps 1 through 4 for each burner if needed.
6. Replace the flame tamers and grates after the burners
have been cooled.
23
continued