Neckstrap Attachment - Bushnell LEGEND Ultra HD Manual Del Usuario

NECKSTRAP ATTACHMENT :

To attach the neckstrap:
1. Thread the narrow black section on one end of the strap
through the small lug on one side of the binocular (below
the eyepiece).
2. Loop the black part of the strap back into the plastic strap
buckle, threading it through the lower part of the buckle
(loosen and push the strap that's already going through the
top part of the buckle out of the way first, to make this easier
to do).
3. Repeat this process for the other side of the strap and
binocular.
4. Adjust the length of the strap so the binocular hangs around
your neck in a comfortable position (you may need to loosen
the strap slightly first, so it pulls easily through the plastic strap
buckles-being careful that the binocular remains supported
so it cannot fall to the floor). Any excess length of black strap
that sticks out after making your final adjustments can then
be secured in place by sliding the small plastic sleeves over it.
5. Be sure to check that the strap is securely fastened by tugging
on the binocular (keep a grip on it) while wearing the strap
around your neck before you start using your binoculars for
the first time.
Fig. 6-Strap
Through Lug
Fig. 7-Strap
Through Buckle
7