Intended Use; General Safety Warnings; Electrical Safety; Personal Safety - Makita CV100D Manual De Instrucciones

• Not for Europe market: This
appliance is not intended for
use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use of
the appliance by a person
responsible for their safety.
Children should be supervised
to ensure that they do not play
with the appliance.
WARNING:
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.

Intended use

The heated vest is intended for warming up the body in
cold environments.

General safety warnings

• Children, handicapped persons, or anyone who are
insensitive to heat, for example a person with poor
blood circulation, shall refrain from using the vest.
• Do not use the vest other than its intended use.
• Never use the vest when inside of it is wet.
• Do not wear the vest with bare skin.
• If you sense anything unusual, switch off the vest and
remove the battery holder immediately.
• Do not let the power cable be pinched. Damaged cable
may cause electric shock.
• If any abnormality is found, contact your local service
center for repair.
• Do not use pins or like. The electric wiring inside may
be damaged.
• Keep maintenance labels and nameplate. If they
become unreadable or missing, contact your local
service center for repair.
• Choose appropriate temperature settings in
accordance with the usage environment for continuous
use.
• The battery cartridge, battery and connectors must not
be allowed to get wet during washing and drying.
• The appliance is not to be used by young children
unless the controls have been pre-set by a parent or
guardian, or unless the child has been adequately
instructed on how to operate the controls safely.
WARNING: In order to avoid the possibility of heatstroke,
disconnect the clothing when moving to an environment
having significantly higher temperature.
PAY ATTENTION: Check carefully on the marking
the internal part of the cloth. Do not insert pins on the
cloth from external or internal parts.
Washing
• When washing the vest, follow the instructions in the
caution tag on the vest.
• Before cleaning the vest, remove the battery holder
and the battery cartridge and then place the power
cable in the battery holder pocket and close the cover.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas increase accident risk.

Electrical safety

• Do not expose the vest to rain or wet conditions.
Water entering the vest may increase the risk of electric
shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the vest. Keep cord away from
heat, oil, sharp edges.
• Do not handle the cord and battery with wet or greasy
hand.
• Never use the jacket when the cord or plug is
damaged.
• Always use the battery holder specified by Makita.
• Do not leave any cord disconnected while the battery
power is supplied. Small children may put the live plug
in their mouth and cause injury.
• Do not connect power source to USB port. Otherwise
there is risk of fire. The USB port is only intended for
charging lower voltage device. Always place the cover
onto the USB port when not charging the lower voltage
device.
• Do not insert a nail, wire, etc. into USB power supply
port. Otherwise a circuit short may cause smoke and
fire.

Personal safety

• Stay alert, watch what you are doing and use common
sense when using the vest. Do not use the vest while
you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while using the
vest may result in serious personal injury.
Vest use and care
• Do not use the vest if the switch does not turn it on and
off. Any vest that cannot be controlled with the switch is
dangerous and must be repaired.
• Maintain the vest. Check for breakage of parts and any
other condition that may affect the vest's operation. If
damaged, have the vest repaired before use.
• Use the vest in accordance with these instructions,
taking into account the working conditions and the work
to be performed. Use of the vest for operations different
from those intended could result in a hazardous
situation.
• If the fuse link has ruptured, return the vest to our
authorized service center for repairing.
• When not in use, store as follows:
- Allow it to cool down before folding.
- Do not crease the appliance by placing items on top
of it.
• Examine the appliance frequently for signs of wear or
in
damage. If there are such signs or if the appliance has
3