Chauvin Arnoux PAC 17 Manual De Instrucciones página 22

Thank you for purchasing this PAC 17 clamp ammeter for oscilloscopes.
For best results with your clamp:
„ read this user manual carefully,
„ comply with the precautions for use.
WARNING, risk of DANGER! The operator must refer to these instructions whenever this
danger symbol appears.
Can be placed on or removed from uninsulated or bare conductors at hazardous voltages.
Type A current sensor as per IEC 61010‑2‑032.
Instrument protected by reinforced insulation.
Information or useful tip.
The product is declared recyclable following an analysis of the life cycle in accordance with
standard ISO 14040.
Chauvin Arnoux has adopted an Eco‑Design approach in order to design this appliance. Analysis
of the complete lifecycle has enabled us to control and optimize the effects of the product on
the environment. In particular this appliance exceeds regulation requirements with respect to
recycling and reuse.
The CE marking indicates conformity with European LVD and EMC directives.
The rubbish bin with a line through it indicates that, in the European Union, the product must
undergo selective disposal in compliance with Directive WEEE 2012/19/EU.
Definition of measurement categories
„ Measurement category IV corresponds to measurements taken at the source of low-voltage
installations.
Example: power feeders, counters and protection devices.
„ Measurement category III corresponds to measurements on building installations.
Example: distribution panel, circuit‑breakers, machines or fixed industrial devices.
„ Measurement category II corresponds to measurements taken on circuits directly connected to low-
voltage installations.
Example: power supply to electro‑domestic devices and portable tools.
ENGLISH
22
Battery.
Direction of the current.
USB.