Aqua Medic angel LED 200 Manual De Instrucciones página 21

WiFi Controller App User Manual
angel LED 200 WiFi controller has two different connection modes:
1. Connect directly to the light
Press and simultaneously until you hear "beeps" from the light, release fingers. The unit is now operating
in "Connect directly to light mode".
a. Factory default connect mode.
b. Wireless router is not necessary.
c. Can't use WiFi network or cellular data.
d. Can't make group lights programming.
2. Use Wireless Router
Press and simultaneously until you hear "beeps" from the light, release fingers. The unit is now operating
in "Wireless Router connect mode".
a. Phone can connect to internet and control light at the same time.
b. Both the mobile phone and aquarium light need to be connected to the Wireless Router.
c. One mobile phone device can program a group of lights at the same time in this mode.
Indicating lamp turns off after 3 seconds
Lamp is working under "connect directly to light" mode. (When power is turned on, the indicator light will be off
a few seconds, indicating that WiFi is working under the "connect to light" mode).
Indicating lamp flashes twice then turns off
WiFi working under the router mode and waiting for configuration status. (When WiFi is in network mode, but
the indicator light is not on, the light needs manual setting to connect light to router).
Indicating lamp flashes three times then turns off
WiFi working under network mode, error occurred while connecting to the home router, which may be a password
error or router is turned off.
Indicating lamp continuous flashing
Transmitting data.
Indicating lamp off
No transmitting data.
Indicating lamp keeps on
Normal operation.
Connection
Download APP
• lOS Operating System 9.3.1 or above is recommended.
• lOS device opens "Apple store". Search for and download the "angelLED" App.
• Android device opens "Google Play". Search for and download the "angelLED" App.
Connect Light directly
1. Make sure the light is connected to wall outlet through power adapter.
2. Exit the App and access phone "Setting" WiFi to connect angel LED 200 WiFi SSID (default
password: 12345678), (picture 1) .
3. Select Wi-Fi SSID: Aqua Medic-XXXX to link. Make sure there is a WiFi fan signal at top right corner.
4. Go back to App, press Search icon to find light (picture 2).
21