Tool Operation - Bostitch TU-225-18HP Manual De Operación Y De Mantenimiento

EYE PROTECTION which conforms to ANSI specifications and provides protection against
flying particles both from the FRONT and SIDE should ALWAYS be worn by the operator and
others in the work area when connecting to air supply, loading, operating or servicing this
tool. Eye protection is required to guard against flying fasteners and debris, which could
cause severe eye injury.
The employer and/or user must ensure that proper eye protection is worn. Eye protection
equipment must conform to the requirements of the American National Standards Institute,
ANSI Z87.1 and provide both frontal and side protection. NOTE: Non-side shielded
spectacles and face shields alone do not provide adequate protection.
BEFORE HANDLING OR OPERATING THIS TOOL:
I. READ AND UNDERSTAND THE WARNINGS CONTAINED IN THIS MANUAL.
BOSTITCH offers one type of operation for the TU-225-18HP series tools.
TRIGGER OPERATION WITH SECONDARY TRIGGER
TRIGGER OPERATION WITH A SECONDARY TRIGGER:
This trigger operated tool is operated by first actuating the trigger under the hand grip, followed by actuating
the trigger under the valve as shown. The tool will actuate each time the trigger under the valve is actuated
until the trigger under the hand grip is released.
Actuate this trigger first
Actuate this trigger second
-7-

TOOL OPERATION

OPERATION