Ejecting Discs; Basic Operations (Player, Source Select And Browse Sections); About The Power Switch Of This Unit - Pioneer MEP-4000 Manual De Instrucciones

Ejecting discs

Press [EJECT h]2.
The disc is ejected from the disc insertion slot.
! This button only functions when in the pause mode or when pausing
at a cue point.
Loading USB devices
Connect the USB device to the USB device insertion slot
4.
The [USB STOP] indicator lights.

Basic Operations (player, source select and browse sections)

Source select section
Drive unit
2 6 f
EJECT SOURCE
TIME MODE
SELECT
CD USB AUTO CUE
1 1 2
DISPLAY
UTILITY
REV FWD
VINYL
JOG MODE
Control unit
b
a

About the power switch of this unit

 To turn the power on
Press [POWER] 1.
Turn on the power of this unit.
The [POWER] indicator lights green.
 To turn the power off
Press [POWER] 1.
Turn off the power of this unit.
The [POWER] indicator turns off.
3 2
EJECT
DISC 1
USB STOP
5 4
g h i
FOLDER TRACK REMAIN
WIDE
±
16
TEMPO
±
M S F 10
REPEAT ±
A.CUE 6
RELAY %
BPM
RELOOP SELECT PUSH
MASTER TEMPO
HOT LOOP OUT ADJUST /EXIT
MT
IN/CUE OUT
TEMPO RANGE
CDJ
BACK
MEMORY
CUE
SEARCH PITCH BEND
CUE
9 8 7
c d e j
Removing USB devices from this unit
! Be sure to follow the procedure below when removing USB devices
from this unit. Removing a USB device without following this proce-
dure could erase this unit's management data and make it impos-
sible to read the USB device.
! When turning this unit's power off, be sure to remove the USB device
first.
1 Press [USB STOP] 5 for at least 2 seconds.
The [USB STOP] indicator turns off.
2 Disconnect the USB device.
1 2
EJECT
OFF
ON
POWER
USB 1 USB 2
USB STOP
4 5
Source select section
EJECT SOURCE
TIME MODE
TEMPO
SELECT
CD USB AUTO CUE
1 1 2
DISPLAY
UTILITY
REV FWD
0
CDJ
VINYL
JOG MODE
Player section
Playback
1 Load the source onto this unit.
2 Press [SOURCE SELECT] 6 and set the source.
! This only functions when in the pause mode or when pausing at a
cue point.
3 Turn the rotary selector i.
Select the track.
! When there are multiple folder layers
— To move to lower layers in a folder, select the folder then press
the rotary selector.
— To return to higher layers, press [BACK] j.
— Press [BACK] for more than 1 second to move to the top layer.
4 Press the rotary selector i.
The track is loaded and playback begins.
3
MULTI ENTERTAINMENT PLA YER
DISC 2
Browse section
MEP-4000
MULTI ENTERTAINMENT PLA YER
FOLDER TRACK REMAIN
WIDE
±
16
TEMPO
±
M S F 10
REPEAT ±
A.CUE 6
RELAY %
BPM
RELOOP SELECT PUSH
MASTER TEMPO
HOT LOOP OUT ADJUST /EXIT
MT
IN/CUE OUT
TEMPO RANGE
BACK
MEMORY
CUE
SEARCH PITCH BEND
CUE
MEP-4000
TEMPO
0
15
En