Idiomas disponibles
Idiomas disponibles
How To Set Up Your New Hitachi Plasma Television
To take measures to prevent the Plasma Television from tipping over and prevent possible injury
it is important to mount the unit in a stable and flat surface.
Securing to a table-top
1. Using wood screws (two) fasten the set to the
clamping screw holes on the rear of the Plasma
TV stand as shown below.
2. Using commercially available wood screws, secure
the set firmly in position.
Wire
Wood screw
two places
Securing to a Wall
1. Keep the Plasma television 4 inches away from the
wall except when mounted using the wall mount
bracket.
2. Secure the television to the wall as shown.
A
* Please adjust the wire length to avoid
touching the wall when turning the TV.
NOTES: 1. Do not block the ventilation holes of the
Plasma Television. Blocking the ventilation
holes might cause fire or defect.
2. In case of an abnormal symptom, unplug
the AC cord.
3. If you purchased the wall mount bracket
option, please ask for professional installer.
Do not install by yourself.
4. Install the unit at a proper area where it does
not expose anyone to any danger of hitting
themselves (for example their hands, head
or face, etc.) against the edge of the unit and
cause personal injury.
Caution when moving the main unit
As this product is heavy, whenever it is moved, two
people arerequired to transport it safely. Whenever the
unit is moved it should be lifted forward using the top
and base on both sides of the Television for stability.
When moving the Television, lift the handles , then
support the top frame as shown below.
42"
NOTE: TheTableTop Stand for model P55T501 is not
included (Optional).
ANTENNA
Unless your Plasma Television is connected to a cable
TV system or to a centralized antenna system, a good
A
outdoor color TV antenna is recommended for best
42"
4 in.
performance.
10 cm
50"
exceptionally good signal area that is free from
4 in.
10 cm
interference and multiple image ghosts, an indoor
55"
4 in.
antenna may be sufficient.
10 cm
LOCATION
Select an area where sunlight or bright indoor
illumination will not fall directly on the picture screen.
Also, be sure that the location selected allows a free
flow of air to and from the perforated back cover of the
set. In order to prevent an internal temperature
increase, maintain a space of 10 cm (4 inches) from the
sides/back of the Television, and 30 cm (12 inches)
from the top of the television to the wall. To avoid
cabinet warping, cabinet color changes, and increased
chance of set failure, do not place the TV where
temperatures can become excessively hot, for
example, in direct sunlight or near a heating appliance,
etc.
10 cm (4 inches)
TURNING ANGLE
The maximum turning angle is 30° (left and right). Do
not place any objects on the path of the monitor when
using the swivel feature.
50"
55"
However, if you are located in an
30 cm (12 inches)
10 cm (4 inches)
C
42"
10.59 in.
D
27 cm
50"
15 in.
38. 1 cm
15 in.
55"
38. 1 cm
C
D
13.93 in.
36 cm
16. 85 in.
42.8 cm
16. 85 in.
42.8 cm
5
