Husqvarna Rider 214T Manual De Usuario página 4

Electrical system overview
1. Battery
2. Main fuse
3. Seat safety switch
4. Microswitch, parking brake
5. Safety switch for the lift lever
6. Ignition lock
Seat safety switch
The seat safety switch starts the safety circuit when the
operator lifts from the seat. The engine and the drive to
the blades stop if the blades are engaged or the parking
brake is not applied. See also
8 .
Forward and reverse pedals
The speed is steplessly adjusted with two pedals. Pedal
(1) is used to move forward, and pedal (2) to reverse.
The product brakes when the pedals are released.
4
6
5
Safety circuit on page
1
2
1
2
Cutting deck
The cutting decks for this product are Combi cutting
decks with BioClip. BioClip cuts the grass into fertilizer.
The Combi cutting decks can also be used without
BioClip. Without BioClip the grass is ejected to the rear.
Symbols on the product
WARNING: Careless or incorrect use can
result in serious injury or death to the
operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Rotating blades. Keep body parts away from
the cover when the engine is on.
Warning: rotating parts. Keep body parts
away.
Look out for ejecting objects and ricochets.
3
4
345 - 003 - 28.11.2017