Husqvarna Rider 214T Manual De Usuario página 12

To adjust the seat
The seat can be tilted forward. It can also be adjusted
lengthways. Loosen the handles below the seat to adjust
it forward or rearward.
To engage and disengage the drive
system
To move the product with the engine off, the drive
system must be disengaged. Pull out the drive system
lever fully to disengage the drive on the axle. Push the
drive system lever in fully to engage the drive on the
axle. Do not use middle positions.
The drive system lever for model Rider 214T,
Rider 214TC is found behind the left rear wheel. Model
Rider 216T AWD has one drive system lever for the
front and one for the rear axle. The drive system lever
for the rear axle is found behind the left rear wheel.
12
The drive system lever for the front axle for
Rider 216T AWD is found behind the left front wheel.
To lift and lower the cutting deck
To lift the cutting deck to transport position, pull the lift
lever rearward. If the engine is on, the blades stop to
rotate automatically.
To lower the cutting deck to mowing position, press the
lock button and move the lift lever forward. If the engine
is running, the blades start to rotate automatically.
To start the engine
1. Make sure that the drive system is engaged, see
engage and disengage the drive system on page 12 .
To
345 - 003 - 28.11.2017