Optional Accessory - Makita HR005G Manual De Instrucciones

Dust extractor attachment

Optional accessory

Installing the dust extractor
attachment
1. Loosen the side grip on the tool.
2. Install the dust cover so that the claws of the dust
cover fit in the grooves between the tool and the side
grip.
1 2
3
► 1. Dust cover 2. Claw 3. Groove
3. Tighten the side grip securely.
4. Set the suitable bellows or dust cover extension
for your work. When you use bellows, attach the joint to
its top. When you stack two bellows, connect them with
the joint.
2
► 1. Dust cover extension 2. Dust cover 3. Joint
4. Bellows
Connecting the tool to the vacuum
cleaner
1. Attach the holder joint to the tool, and then attach
the hose holder to the holder joint.
► 1. Holder joint 2. Hose holder
NOTE: The hose joint can be attached to either side
1
of the tool.
WARNING:
only for attaching the holder joint.
Using the mounting part for any other purpose may
cause an unexpected accident.
2. Fix the hose to the hose holder.
3 4
► 1. Hose holder
NOTE: Use joint 25 to connect the hose and the dust
cover if necessary.
11 ENGLISH
Use the mounting part of the tool
1
2
1