Converting for GROUPS 2 - 3 (15-36kg)
It is recommended that you use the 5-point harness for as long as possible. Try
removing the booster cushion as this could allow you to use the seat in group I
configuration for longer.
A
A
B
B
36
When your child has outgrown the group 1
(9-18kg) configuration and you wish to use
the seat for a child in either group 2(15 -
25kg) or group 3 (22-36kg) then you will
need to remove the child car seat's integral
5-point harness.
Lift the fabric adjuster cover at the front
of the car seat and whilst pressing button
(A), pull forwards on the shoulder straps
(not the shoulder pads) to completely
C
loosen the harness straps and shorten the
adjuster strap (B) as much as possible. Any
remaining strap can be rolled up and stored
under the red plastic cover (C).
C
IMPORTANT: DO NOT pull the shoulder
pads.
Pull the recline adjuster handle under the
front of the shell and whilst holding it,
pull the shell forwards to its most reclined
position.
E
Release catch (D) on the top left hand side
of the shell and remove the installation bar
(E).
E
DINAMYK 9-36