Insignia NS-LCD32 Guia Del Usuario página 13

Insignia NS-LCD32 LCD TV
To navigate the menu:
1 With the television turned on, press the
MENU button. The main menu opens.
2 Press or
3 Press OK or
4 Within the menu, use
navigate through the options or adjust an
option. Press OK or
enter a sub-menu, or toggle the settings of
the selected menu item.
5 Press MENU to return to the previous level
menu, or press EXIT to exit the main menu
and return to your program.
Note
Menu items that are not selectable are grayed out.
Displaying the information banner
To display the information banner:
• Press the INFO button to display the
information banner. The information banner
displays status information such as the
channel number and signal source.
Depending on the mode, different information
is displayed. In DTV mode, more information,
such as the channel number, channel name,
and signal resolution can be displayed.
Selecting the on-screen menu language
To select the menu language:
1 Press MENU.
2 Press or
press OK or
3 Press or
then press OK or
4 Press EXIT to return to watching the
television.
Selecting the input signal source
To select the input signal source:
1 Press INPUT. The SOURCE INPUT menu
opens.
to select a menu page.
to enter that menu page.
, , , or to
to confirm a setting,
to select Setup menu, then
to access the submenu.
to select Menu Language,
to select the language.
www.insignia-products.com
2 Press or
Options include:
• TV—Watch the TV signal.
• Composite-1 (or S-Video)—Watch the
signal from the AV INPUT 1 (or S-VIDEO)
terminals.
• Composite-2—Watch the signal from the
AV INPUT 2 terminals.
• Component-1—Watch the signal from
the COMPONENT INPUT 1 terminals.
• Component-2—Watch the signal from
the COMPONENT INPUT 2 terminals.
• VGA—Watch the signal from the VGA
jack.
• HDMI-1—Watch the signal from the
HDMI1 input jack.
• HDMI-2—Watch the signal from the
HDMI2 input jack.
3 Press OK or
4 Press EXIT to return to watching the
television.
Memorizing the channels
When you turn on the television for the first time,
you should perform an auto channel search to
set up the stations on your television.
Note
Be sure to select the TV source input before
completing this procedure.
Selecting the tuning band
Before your television can memorize the
available channels, you must specify the type of
signal source that is connected to the television,
such as antenna or cable.
To select the tuning band:
1 Press MENU.
2 Press or
press OK or
to select the input source.
to select the input source.
to select Setup menu, then
to access the submenu.
11