Weston PRO-1000 Manual De Instrucciones página 7

ASSEMBLY
!
WARNING!!
Before cleaning or servicing the Dehydrator, make sure it is unplugged
from the power source. It is important to read & fully understand all of the instructions
& safeguard prior to use of the Dehydrator.
1. The Shelf Brackets (5 on each side of the cabinet) will
need to be installed on the inside of the Dehydrator.
2. Insert a Shelf Bracket, so that the stoppers are in the
back of the dehydrator ( FIGURE 1 ).
3. Starting at bottom, install the Shelf Bracket by sliding it
into notches on sides of Dehydrator ( FIGURE 2 ).
4. Assemble 5 rails on each side of the Dehydrator.
5. Slide a Tray onto each Shelf Bracket rail.
Back of Dehydrator
Stoppers
Go in the Back
Shelf Bracket -
Right Side
Notches on the
inside (Left) of
the Dehydrator
CAUTION!
EDGES
MAY BE
SHARP!
Shelf Bracket -
Left Side
Shelf Bracket -
Left Side
FIGURE 1
FIGURE 2
7