Kohler FLEUR LITE Manual Del Usuario página 5

TO INSTALL LIFT ROD AND TANK COVER
Check the trip lever flange nut for tightness. If the nut is loose, first
hand-tighten it. Then tighten it an additional 1/4 turn.
Insert the lift rod into the flange in the center of the tank cover. Set
the tank cover on the tank.
Carefully lift the front of the tank cover just enough to gain access
to the flapper chain and lift rod. Insert the flapper chain S-hook into
the middle hole in the lift rod. Set the tank cover onto the tank.
Test flush the toilet several times to ensure proper operation. If the
flapper ball does not seat properly when the lift rod is raised,
provide more flapper chain by:
S
relocating the flapper chain S-hook to the bottom hole in
the lift rod, or by;
S
repositioning the flapper chain S-hook on the flapper
chain.
If the toilet does not flush when the lift rod is raised, remove some
of the slack in the flapper chain by relocating the flapper chain
S-hook to the top hole in the lift rod.
Kohler Co., Kohler, WI U.S.A.
Lift Rod
Fig. #10
Tank Cover
Lift Rod
Flapper Chain
S-Hook
Tank
5
Trip Lever
Flange Nut
Tank Cover
Tank
Flapper Chain
Fig. #11
A
1007287-2-