R
INSTALLATION
INSTRUCTIONS
BEFORE YOU BEGIN
NOTES
S Observe all local plumbing and
building codes.
S Carefully inspect the new bowl
for damage.
S If flush valve is not installed,
refer to manufacturer's
instructions before installing.
TOOLS AND MATERIALS RECOMMENDED
Safety
Spud
10" Adjustable
Glasses
Wrench
Wrench
SITE PREPARATION
REMOVE THE OLD BOWL
S Turn the water supply off.
S Sponge out any remaining
water in bowl.
S Disconnect the flush valve.
S Remove the old caps, washers,
fiber washers, toilet, and the old
gasket from the closet flange.
CAUTION: Risk of
possible hazardous gases.
If installation of the new bowl
is delayed, temporarily stuff a
rag in the outlet coupling
hole.
A
1009797-2-
COMMERCIAL TOILETS
K-4329, K-4330, K-4450
K-4460, K-4475
CAUTION: Risk of personal
injury or product damage.
Handle with care. Vitreous
china can break or chip if bolts
and nuts are overtightened, or if
product is handled carelessly.
Putty
Tape
Knife
Measure
Outlet
Coupling
Bearing
Nut
Carrier
Stud
Bearing
Washer
Fiber Washer
Washer
Gasket
Sponge
Toilet
Cap
E2001 Kohler Co.
1 1