Attaching The Grille - Yamaha NS-B901 Manual De Instrucciones

ATTACHING THE GRILLE
The speaker and the grille are packed separately.
To attach the grille, line up the four salients (magnet) on the
reverse side of the grille with the four corresponding pegs.
Notes
• When the grille is not attached, take care not to
touch the speaker units with your hands or to
exert excessive force with tools.
• There are magnets on the reverse side of the grille.
Do not place the grille close to objects that might
be affected by magnets, such as TVs, clocks,
magnetic cards, diskettes etc. when you don't use
it.
English
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying documents means that used electrical and
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points,
in accordance with your national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential
negative effects on human health and the environment which could otherwise arise from inappropriate waste
handling.
For more information about collection and recycling of old products, please contact your local municipality,
your waste disposal service or the point of sale where you purchased the items.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of disposal.
3
En
SPECIFICATIONS
Type . ................................2-way bass reflex speaker system
Driver ................................................13 cm (5") cone woofer
Impedance ...................................................................... 6 Ω
Frequency Response ................... 52 Hz to 50 kHz (–
Nominal Input Power ..................................................... 30 W
Maximum Input Power . ................................................ 120 W
Sensitivity . ..................................................... 87 dB/2.83 V/m
Crossover Frequency ................................................... 4 kHz
Dimensions (W x H x D) ........................220 x 349 x 237 mm
Weight ........................................................... 5.9 kg (13 lbs.)
• Specifications are subject to change without notice due
to product improvements.
• Care should be taken not to exceed the input power
values noted above.
non magnetic shielding type
3 cm (1") aluminum dome tweeter
to 100 kHz (– 30 dB)
(8-5/8" x 13-3/4" x 9-3/8")
10 dB)