English - Milwaukee PH 27 X Manual Original

TECHNICAL DATA
Rotary Hammer
Production code
Rated input
Output
No-load speed
Speed under load max.
Rate of percussion under load max.
Impact energy per stroke according to EPTA-Procedure 05/2009
Drilling capacity in concrete
Drilling capacity in steel
Drilling capacity in wood
Light core cutter in bricks and limestone
Chuck neck diameter
Weight according EPTA-Procedure 01/2003
Noise information
Measured values determined according to EN 60 745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K =3dB(A))
Sound power level (Uncertainty K =3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Hammer-drilling into concrete:
Vibration emission value a
h, HD
Uncertainty K =
Chiselling:
Vibration emission value a
h, Cheq
Uncertainty K =
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
WARNING!
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory
contacting a „live" wire may make exposed metal parts of the power
tool „live" and could give the operator an electric shock.
PH 27 PH 27 X
220-240 V 220-240 V
4489 46 02... 4489 53 02...
... 000001-999999 4489 61 02...
... 000001-999999
800 W 800 W
400 W 400 W
0-1600 min 0-1600 min
-1
0-1300 min 0-1300 min
-1
0-4800 min 0-4800 min
-1
2,8 J 2,8 J
26 mm 26 mm
13 mm 13 mm
30 mm 30 mm
68 mm 68 mm
43 mm 43 mm
2,8 kg 3,0 kg
93 dB (A) 93 dB (A)
104 dB (A) 104 dB (A)
11,4 m/s 11,4 m/s
2
1,5 m/s 1,5 m/s
2
10,2 m/s 10,2 m/s
2
1,5 m/s 1,5 m/s
2
Additional Safety and Working Instructions:
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is
recommended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Do not machine any materials that present a danger to health (e.g.
asbestos).
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
Switch the device off immediately if the insertion tool stalls! Do not
PH 27 X
110-120 V
4489 65 02...
... 000001-999999
800 W
400 W
0-1600 min
-1 -1
0-1300 min
-1 -1
0-4800 min
-1 -1
2,8 J
26 mm
13 mm
30 mm
68 mm
43 mm
3,0 kg
93 dB (A)
104 dB (A)
10,3 m/s
2 2
1,5 m/s
2 2
8,2 m/s
2 2
1,5 m/s
2 2

English

9
GB