Assembly - Mi-T-M Corporation MH-0125-RM10 Manual Del Operador

. Slide axle through Wheel Frame and attach wheels, washers and cotter pins.
2. Place main structure on Wheel Frame and fasten with screws provided (Screws used for temporary joint
in packing are not needed for assembly).
3. Attach Safety Guard to front of heater with screws provided.
NOTE: Save the box and packaging materials for future storage.
fUel (1-K KeRosene)
For optimal performance of this heater, it is strongly suggested that -K kerosene be used. -K kerosene has
been refined to virtually eliminate contaminants, such as sulfur, which can cause a rotten egg odor during the
operation of the heater. However, # or #2 fuel oil (diesel fuel) may also be used if -K kerosene is not avail-
able. Be advised that these fuels do not burn as clean as -K kerosene, and care should be taken to provide
more fresh air ventilation to accommodate any added contaminants that may be added to the heated space.
Using diesel fuel can cause excess soot production. DO NOT use any fuel that is not approved above.
KeRosene shoUlD onlY be sToReD In a blUe ConTaIneR ThaT Is CleaRlY MaRKeD
"KeRosene". neveR sToRe KeRosene In a ReD ConTaIneR, beCaUse ReD ConTaIneRs
aRe assoCIaTeD WITh GasolIne.
Kerosene Radiant Portable Heaters Manual

ASSEMblY