Information About This Operating Manual; Symbols Used In These Instructions; Warnings; Additional Information - Oase BioTec ScreenMatic2 18000 Instrucciones De Uso

- EN -
Translation of the original Operating Instructions
1

Information about this operating manual

Welcome to OASE Living Water. You made a good choice with the purchase of this product BioTec Screen-
Matic² 18000/24000/38000.
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with
the unit. Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a
new owner.
1.1

Symbols used in these instructions

1.1.1

Warnings

The warning information is categorised by signal words, which indicate the extent of the hazard.
W A R N I N G
• Indicates a possibly hazardous situation.
• Non-observance may lead to death or serious injuries.
N O T E
Information for the purpose of clarification or for preventing possible damage to assets or to the envi-
ronment.
1.1.2

Additional information

 A Reference to a figure, e.g. Fig. A.
→ Reference to another section.
2

Product Description

2.1

Unit configuration

 A ScreenMatic rotating screen unit
1 Control device
2 Operating panel
3 Sensor underneath the control device
• When the sensor comes into contact with the water on the ScreenMatic screen, an automatic cleaning process is triggered.
4 Stripper
• scrapes the debris from the ScreenMatic screen and conveys it into the debris tray.
5 ScreenMatic screen
6 "Max. water jet" mark
• Debris may be washed out of the debris collection tray if the water jet from the water distributor exceeds this mark.
7 Transformer
• Voltage supply for the control device and motor
8 Motor
• Drive of the ScreenMatic rotating screen unit
14