Using Ice Maker; Defrosting; Door Conversion - THOMSON THD 300 NF WH Manual De Instrucciones

USING THE ICE MAKER
1. Take the twisted ice maker out and fill the ice maker with water. Then put the ice maker back to its
position.
2. Wait until ice forms in the ice maker. Rotate the knob 180 degrees counterclockwise and then ice will
fall into the storage box.
3. Get ice from the ice storage box and serve.
WARNING: Fill with potable water only.

DEFROSTING

This appliance is equipped with a frost free system. This system enables the freezer compartment to
remain permanently ice-free, however, the food stored in the freezer compartment will not defrost.

DOOR CONVERSION

If you need to hinge your fridge and freezer doors on the opposite side it is recommended that you call
your local authorised service agent to make this conversion or ask a technician.
Before you reverse the doors, you should ensure the appliance is unplugged and empty. It is
recommended to use a crosshead screwdriver and a spanner (both not supplied).
1. Remove the top hinge cover with a screwdriver. Unscrew the screw and remove top hinge. Take the
freezer door down and set it aside.
2. Unscrew the middle hinge screw and remove the middle hinge. Take the fridge door down and set it
aside.
3. Unscrew the bottom hinge screw and remove the bottom hinge.
4. Unscrew the screws of right door shutters from fridge and freezer doors. Remove 2 sets of right door
shutters and stops. Put them in the bag for future use.
5. Take 2 sets of left door shutters and stops out of the bag. Fix them on the opposite bottom left
position of fridge and freezer doors.
6. Take the left bottom hinge out of the bag. Fix the bottom left hinge by tightening the screws.
7. Align the hole of fridge door to the barrel of the hinge and assemble the fridge door. Adjust the door
and make sure the door seal has come into contact with cabinet. Position the left middle hinge and
insert the barrel into the upper hole of the door and secure it firmly.
8. Align the bottom lower shaft hole and position the left fridge door stop to the center of the middle
hinge.
9. Assemble the freezer door and make sure the door seal has come into contact with cabinet. Insert
the upper hinge into the top hole of freezer door and fix the hinge with screw tightly.
10