Recharging Nimh Batteries - Williams Sound Pocketalker 2.0 PKT E1 Manual Del Usuario

Internal T-Coil Switch and Indicator LED
Pocketalker: Right Side View
Power "On"
Green LED
Power On/Off
and
Volume Adjust
Rotary Dial
T-coil
Switch
Note: For best performance when using the t-coil feature, the
Pocketalker must be in a vertical orientation. This ensures the best
magnetic coupling to the loop system.

Recharging NiMH Batteries

The Pocketalker can recharge NiMH batteries when used with an
optional BAT KT7 (US) or BAT KT8 (International) charging kit.
1. Verify or change battery switch to the NiMH position.
2. Verify or insert NiMH batteries into battery compartment.
3. Using the included USB A to USB Micro-B cable, plug the
Lanyard Slot
4. The charging indicator will blink slow while charging, and
WARNING!
10
USB Micro-B end into the USB Micro-B charging port on
the Pocketalker. Plug the USB A end into the USB A port
on the power supply included with the charging kit. Plug
the power supply into a wall outlet.
then will stay on solid when the unit is charged.
Do not attempt to charge Alkaline batteries!
T-Coil Symbol
T-Coil "On" LED
T-Coil Switch
(in "On" position)
Charging LED
indicator
USB Micro-B
Charging Port